Xerox WorkCentre M128

[simboy1234 · Accepted solution]

Update: I was able to fix the issue by using Windows Vista 64bit Drivers for M128.

http://www.support.xerox.com/support/workcentre-m123-m128/file-download/enus.html?operatingSystem=wi...

Double sided works now.

T&R
Arjun

[Joe Arseneau]

Same error with both duplex options? (Short edge/Long edge)

Same error with PCL driver verses PS? (you need to use the Server 2003 drivers for PCL, it is possible yours doesn't have the PS printing option)

[simboy1234]

Hello there,

we have a old Xerox WorkCentre M128, which for sometime was just being used as a copier, now we have added a network card to it and we have set it ip as a network printer, we also have a active directory network setup so all our printers are shared on the AD server running Windows server 2008 (64bit), we are not able to get the correct drivers, we tried the global printer driver which works fine for single sided printing our main aim is to achieve double sided printing. if we change it to double sided printing and try to print it throws up and error page (printed) http://imgur.com/jqbi8pl

if anyone has faced this issue or has a possible solution i could try and i would really appretiate it. 

T&R

Arjun