Xerox Workcentre 7225 color tone not right!

[Joe Arseneau]

The too much magenta issue could likely be replicated via the application.

If you submit for an RGB output, you get too much magenta, and blue becomes purple for example, and it is really easy to test that.

In Acrobat it would be File > Print > Advanced
 and change the box for Let Printer determine color to whatever it isn't right now.

[gtdaniel]

Thanks for the anwser!

Indeed, about the quality, samples on the right are much better...

That could be because of printer, 7232 works up to 600 dpi and 7225 works up to 1200/2400 dpi...

But for me 7232 works better, because what i see on the screen is what i get on paper,

and is what i get on offset press...

So if i send to a client a proof on 7225 and later after print on press he receive his order

with another color tone i am guilty for that...

That's my problem!

I am not trying to fix wrong printer, the printed samples are only to see color shift on 7232/7225, not for quality of print...

[Joe Arseneau]

The pictures on the right, in my mind, are vastly superior in every possible way, better clarity, more vibrant, much higher contrast.

Everything on the left has too much magenta, is blurred so much you can't see any details of the building or the guys face.

There is also a magenta plate shift on the left.

You are trying to fix the wrong printer, or your picture ruined what you are trying to convey.

[gtdaniel]

Hello!

I have a problem with my 7225 printer and i can not make ajustments to achive same color tone from 

7225 new printer to 7232 old printer. I mean not exactly, but close...

Low tones output on paper with yellowish tone... 

Is same working conditions, same programs, same files... On 7232 output is fine, but on 7225 is yelowish...

Both printers have PS Level 3 enable and work fine.

I try tons of drivers, advanced settings in driver (i am on win10 x64) i try ps drivers for win10 x64 and

ps drivers from win7 x64 and not good results...

I try custom settings about color (Luminosity, Contrast, Saturation) and not work...

I make calibration of printer, same result...

I can not escape from that yellowish tone...

I must mention that 7232 printer wich works fine, works with default settings, i make not extra settings to

obtain good results...

I attach a photo with samples printed on both printers.

Thanks in advance!