cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Aleksey New Member
New Member

c60 Install driver - default print settings

Hello!
I have Xerox C60 and WC7855.
When, i installing the driver on the local host, the default print settings = A4, and it`s OK!
But, when I instaling on the server, the default print setting = Letter.
Regional settings are the same.
What the problem?
Thank you.

0 Kudos
2 Replies
Analyst Nation Moderator Joe053204-hcl
Analyst Nation Moderator

Re: c60 Install driver - default print settings

The driver pulls the default from what is loaded in the tray, so if the Server 2012 driver is the same as the one on the client PC then the issue is in SNMP, the server isn't pulling it correctly.

 

So compare the SNMP setting in the port as well as the Configuration tab in the drivers on both the Server and the Client.

 

So these

21.JPG

 

And these

 

22.JPG

 

But if Server 2012 was using the V4 driver, or the MS Provided Xerox Class Driver, then you would need to grab the Xerox Print Experience App to get it working properly, this is just a thing with Class drivers and V4, to use them, you need an app from the vendor to gain full use.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe
Aleksey New Member
New Member

Re: c60 Install driver - default print settings

Unfortunately, it does not.
Default Print - Letter.xerox_C60.jpg

0 Kudos