driver for printing tabloid

[George850650-XRXN]

Bethb,

When you open printing preferences you should see these options if the driver is communicating with the machine. A key indicator is that it will show supply status. 

If your screens do not look like this please see this post to insure that your device is installed correctly.

https://forum.support.xerox.com/t5/Hardware/Printer-wo-nt-wake-up-to-print-Workcentre-3025BI/m-p/249... 

If they do here are screenshots where you can manual configure the device to reflect installed features.

I hope this helps.

[Jovani639]

---

@bethb wrote:

Does anyone know if there's a driver that will allow for printing Tabloid (11x17) from Tray 4 for a Versalink C7025? The workaround of moving the trays is not optimal. The V4 driver seems to only recognize trays 1 & 2.  ACE Flare Account

---

Check this out https://www.support.xerox.com/en-us/article/en/1671779.html 

[bethb]

Thank you, Tammy. I will do that.

[TammyL-Xerox]

Hello bethb, 

I see no one has responded to this post yet. So, at this point I would recommend contacting your local Xerox Support Department to speak with a Product Specialist for more assistance with which driver will be best for what you are looking to do. . Please call 1-800-821-2797 or 1-800-835-6100.   

[bethb]

Does anyone know if there's a driver that will allow for printing Tabloid (11x17) from Tray 4 for a Versalink C7025? The workaround of moving the trays is not optimal. The V4 driver seems to only recognize trays 1 & 2.