cancel
Showing results for 
Search instead for 
Did you mean: 
dean123 New Member
New Member

phaser 6310n insists on printing to manual feed

Jump to solution

our users can't use this printer because it insists on trying to print from the manual feed rather than the paper tray. the print jobs are images or pdf files normalized to 8½ x 11 inches. the print tray is loaded with 8½ x 11 paper, and the tray config from the front panel is set to use 8½ x 11 paper. the printer driver is set to default to '1stTray'. we've tried all combinations of lp and lpr options '-o fitplot', '-o size=100', '-o media=letter' and nothing works. please help.

 

o/s - centos 6.5

driver profile - Xerox-Phaser_6130N-Postscript.ppd / xrx6130n.ppd

 

thanks

dean

0 Kudos
2 Replies
Community Manager CherylO-Xerox
Community Manager

Re: phaser 6310n insists on printing to manual feed

Jump to solution

Hi Dean123,

Thank you for using the Support Forum. Please take a look at the solution for selecting the paper tray in the print driver.  If this does not help please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos
dean123 New Member
New Member

Re: phaser 6310n insists on printing to manual feed

Jump to solution

this turned out to be a unix issue. the user's account had options set for the printer that were different to those for other users.