cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
arwicfire New Member
New Member

phaser 7800 wont print, no error message

Product Name: Phaser 7800
Operating System: Windows 10 x64

I have a Phaser 7800 that will not print but gives no error message.

I tried printing the Configuration page and the usage page. It shows up on the screen as if it is going to do it, it even starts to sound like its warming up, but then it just settles back down and does nothing. The screen stills shows printing page 1 of 2 on the configuration page, but it does not do anything.

I have reset it, checked all the cartridges, check the fuser, removed the board from the back and reseted the memory, i have reset the NVRAM and Factory settings.

Any ideas?

0 Kudos
5 Replies
gabiene Advisor
Advisor

Re: phaser 7800 wont print, no error message

Hi,

I had a similar issue and I finish to replace the SD card.

 

Gabi

0 Kudos
arwicfire New Member
New Member

Re: phaser 7800 wont print, no error message

I notice it has a HD, a Memory stick, and a SD Card.

You are saying try replacing the SD Card? Is this something i have to get from xerox or just something that will fit?

0 Kudos
gabiene Advisor
Advisor

Re: phaser 7800 wont print, no error message

Yes. The Sd have part no.160E04220. 

0 Kudos
arwicfire New Member
New Member

Re: phaser 7800 wont print, no error message

tried using one from another phaser7800 and this didnt correct the issue.

any other ideas?

0 Kudos
gabiene Advisor
Advisor

Re: phaser 7800 wont print, no error message

Have you tried a firmware update?

0 Kudos