Hell charbrier.mathieu,
Here are some steps on how to adjust the margins for you to try. If you are still having issues after trying these steps, I suggest that you call into our support department for assistance @ 1-800-821-2797 or 1-800-835-6100.
- From the control panel, navigate to: Settings > Device > Maintenance > Config Menu > Scanner Configuration > Scanner Manual Registration.
- Touch Print Quick Test.
- Place the Print Quick Test page on the ADF tray.
- Touch Front ADF Registration or Rear ADF Registration.
- To align Front ADF Registration, place the test page face-up, short edge first into the ADF.
- To align Rear ADF Registration, place the test page face-down, short edge first into the ADF.
- Touch Copy Quick Test.
- Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are different from the original document, then adjust Horizontal Adjust and Top Margin.
- Repeat the previous two steps until the margins of the Copy Quick Test page closely match the original document.
Thanks,
TammyL-Xerox
Community Manager
Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!
