cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
brian-- New Member
New Member

toner shows empty and loud clicking

Jump to solution
Product Name: Phaser 7800
Operating System: macOS 10.13 - High Sierra

have a phaser 7800 with about 25,000 pages on it.  The OEM Cyan cartridge went from full to 50% to empty in a matter of 700 or so prints, all of which were black, red and yellow text at about 1% coverage.  when i pulled the cartridge out it still has plenty of toner left, i have shaken it, verified the gear turns freely and reinstalled. 
the printer makes a loud clicking noise for about 15 seconds before showing the cartridge is empty.  i swapped the cyan cartridge in from my other 7800 that was about 80% full and it shows empty as well clicks loudly too.  Any suggestions on what to check or try before attempting to locate a service tech?

0 Kudos
2 Replies
gabiene Advisor
Advisor

Re: toner shows empty and loud clicking

Jump to solution

Hi,

You will need a tech, because in the dispenser system there is a gear that  can be damaged (from there I supossed is that sound). Of course it could be from the toner dispense motor.

 

Gabi

0 Kudos
brian-- New Member
New Member

Re: toner shows empty and loud clicking

Jump to solution

Just wanted to follow up in case another person ran into the same issue..  I made an attempt to schedule service through 1 of the 2 support partners covering my area, about 4 days later i recieved a call stating they no longer service my model printer, the other partner did not reference my printer on their website at all so i decided to dive into it myself.

long story short i tore down the top side (output tray)  and front (toner side) of the printer and was able to remove the feeder tube tray that the color toners rest on, once that was out i noticed the gear on the tray for my cyan toner was missing part of two teeth.  i attempted to  turn the gear but it was bound up. i pulled the gear off the back side and pushed the gear rod toward the front of the printer exposing the inner spiral mechanism and dumping all of the toner on the floor including several 1/4" size chunks (only used xerox brand toners in this one).  i tapped the tube on the floor a few times to get the rest of the loose toner out and reassembled.  mechanism spun with little bind- there is a tension arm in there creating some resistance.  put the printer back together, powered up let it run through the process telling me the cyan was empty, removed and reinserted the cartridge and about 3 minutes of calibrating later all is working again.