cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

workcentre 7125 cups configuration

Hi

 

I'm installing the Xerox workcenter 7125 on cups using the ppd xr_WorkCentre7120.ppd provided by Xerox for Linux.

 

this is my cups configuraion.

Printer doesn't doesn't work  and the job on the prnter goes in error.

 

<Printer 56LSR007>
Info 56LSR007
Location 56LSR007
MakeModel Xerox WorkCentre 7120
DeviceURI lpd://146.47.59.75/lp
State Idle
StateTime 1377101091
Reason media-low-report
Type 8433916
Filter application/vnd.cups-raw 0 -
Filter application/vnd.cups-command 0 commandtops
Filter application/vnd.cups-postscript 0 -
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
Attribute marker-colors \#000000,#FFFF00,#FF00FF,#00FFFF,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none
Attribute marker-levels 43,61,70,73,0,89,21,21,22,0,0,0
Attribute marker-names Black Toner [K] Cartridge;SN16151A80E000046D,Yellow Toner [Y] Cartridge;SN1725AB80E000046D,Magenta Toner [M] Cartridge;SN11319A80E000044B,Cyan Toner [C] Cartridge;SN012C3780E0000457,Waste Toner Container,Black Drum Cartridge,Yellow Drum
 Cartridge,Magenta Drum Cartridge,Cyan Drum Cartridge,Bias Transfer Roll,Transfer Belt,Fuser Assembly
Attribute marker-types toner,toner,toner,toner,wasteToner,opc,opc,opc,opc,transferUnit,transferUnit,fuser
Attribute marker-change-time 1377101090
</Printer>

 

If I use the 'Generic PCL 6/PCL XL Printer Foomatic/lj5gray' with this cups configuration it works but take 3/4 minutes to print a page

 

<Printer 56LSR007>
Info 56LSR007
Location
MakeModel Generic PCL 6/PCL XL Printer Foomatic/lj5gray
DeviceURI lpd://146.47.59.75/lp
State Idle
StateTime 1376766342
Reason media-low-report
Type 8400924
Filter application/vnd.cups-raw 0 -
Filter application/vnd.cups-postscript 100 foomatic-rip
Filter application/vnd.cups-pdf 0 foomatic-rip
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
Attribute marker-colors \#000000,#FFFF00,#FF00FF,#00FFFF,none,#000000,#FFFF00,#FF00FF,#00FFFF,none,none,none
Attribute marker-levels 45,62,70,74,0,90,21,21,22,0,0,0
Attribute marker-names Black Toner [K] Cartridge;SN16151A80E000046D,Yellow Toner [Y] Cartridge;SN1725AB80E000046D,Magenta Toner [M] Cartridge;SN11319A80E000044B,Cyan Toner [C] Cartridge;SN012C37
80E0000457,Waste Toner Container,Black Drum Cartridge,Yellow Drum Cartridge,Magenta Drum Cartridge,Cyan Drum Cartridge,Bias Transfer Roll,Transfer Belt,Fuser Assembly
Attribute marker-types toner,toner,toner,toner,wasteToner,opc,opc,opc,opc,transferUnit,transferUnit,fuser
Attribute marker-change-time 1376766342
</Printer>

 

0 Kudos
1 Reply
Highlighted
Valued Advisor
Valued Advisor

Re: workcentre 7125 cups configuration

Hey you!

 

What's the error code if you get one?

Otherwise, do you have Postscript installed on ur printer?

 

Best Regards

Kimzi


--------------------------------------------
Please remember to select "Accept as Solution" for posts that helped you solve the issue.

0 Kudos