Hello!
I had the same issue after I have replaced my old WiFi router.
I intentionally kept/setup the same WiFi SSID (network name) and password
on the new router as I had with the old router.
This I did not have to work with the other wifi devices in my home, and I think this caused
the problem with the Xerox 3025.
I think for me a "factory reset" of the Xerox 2025 system helped.
I had to do it on the web interface so it was a bit tricky.
Here is what I did in more detail:
- Setup my "old-router with a new WiFi SSID"
- Downloaed Xerox 3025 SW installer and Xerox 3025 firmware (from 2018) to my laptop
- Connected laptop to "old-router with a new WiFi SSID"
- Started Xerox installer app, using USB, and asked to setup Wireless
- Connected Xerox to "old-router with a new WiFi SSID" - this was successful!
- Connected to Xerox using webbrowser
- Firmware updated my printer using webbrowser (I think this was not necessary though).
- Factory reset of 3025 using webbrowser (likely you can do it on the keypad as well,but I came this way)
- Connect laptop to "new router with old SSID"
- Started Xerox installer app, using USB, and asked to setup Wireless
- Connected Xerox to "new-router with a old WiFi SSID" - this was successful!
From this point it was OK.
Hope it helps others.
Andras
