xerox 6280

[nildera]

Hello Fiery,

now the printer printing some color spots, do you have any ideia about them??

I need to know how I can find the chips part number of xerox 6280, Thank you very much until now, you help me a lot with taht problem with 7242, I'tring fixing that one about 2 years....

[nildera]

thak you to you as well, the pictures helped a lot, thank you

[nildera]

Thank you very much, very simple touch and every thing are ok now, work perfectly....thank you very much again

[Karl063192 · Accepted solution]

I concur with fiery on this one. To make it even more clear, here's picture of what he means:

Note the correct position, it is in the down position.

Hope it's help.

K.

[fiery · Accepted solution]

Looks like a transfer problem. Open the left door and check below the fuser you will see the transfer belt. There are two metal arms with black plastic on the end of them. One in the rear side and one in the front. They need to be in the proper position, both either up or down.

[Joe Arseneau]

That is either a bad IBT transfer belt or a bad fuser.

Check the consumables for errors, failing that make certain the paper tray was not set for a much heavier weight stock (Causes the fuser to get way too hot and melts the toner to itself)

Last step remove the IBT(R2) and Fuser (Left side door) to see if physically damaged. If neither try checking the drum (R1) but I think that less likely.

[nildera]

the pages are like washed out, any ideia????