Different behavior of Xerox 7120 and 7220 with XSA

[Joe Arseneau]

Is it possibly to enable password id's of local users to take effect on new models of Xerox ? No it is not

Is this behavior is ok (differs on different models).  The password is only available on Fuji-Xerox models and not Xerox models, the bad thing here is that unless you ask during purchase, you won't know if it is Xerox or Fuji-Xerox as they are not branded as such in North America

Are there any more means to make password-enabled accounting work similar way on both Xerox 7120/7220 ?
Not by device only, it is possible to do using Network Accounting (LDAP,Kerberos) or via third party hardware/software

[infrasty]

Greetings, community

Please help clarify on XSA (Xerox Standard Accounting )what is correct behavior and how to make them behave equally:

1.) On Xerox 7120 there is XSA enabled and local users created ( 0001 userid , 0001 password, and some group account ).

When printing through Windows Print Server and Xerox Global Printer Driver there is GUI window, asking for userid / password to continue printig (see below). After entering userid / password id printing goes fine.

2.) On Xerox 7220 with XSA enabled and same local userid's/password id's created there are different window, and when printing it doesn't asking for password at all. Only correct user id are necessary (see below).

QUESTION: Is it possibly to enable password id's of local users to take effect on new models of Xerox ? Is this behavior is ok (differs on different models). Are there any more means to make password-enabled accounting work similar way on both Xerox 7120/7220 ?

Thank you, any help would be appreciated.

On both printers drivers used are : Driver Version: 5.433.6.ON 2015.05.20 [X-GPD]

Operating system: Windows Server 2012 R2

Settings for accounting on both models:

   Accounting: Xerox Standard Accounting

   Promt for User-ID: Always ask

   Mask User-ID: Disabled

   Mask Group-iD: Disabled.

Regards,

Alexander