Showing results for 
Search instead for 
Did you mean: 
FKassi New Member
New Member

SMart eSolutions



We are the Xerox Distributor exclusif in Morocco and we would like to configure SMart eSolutions on our devices installed in our fleet.

Many thanks in advance!!




Tags (1)
0 Kudos
3 Replies
Community Manager CherylO-Xerox
Community Manager

Re: SMart eSolutions

Hi FKassi,

Thank you for using the Support Forum. Please take a look at the SMart eSolutions page at Xerox .com, there you will find all the information.  If you have additional questions please consider contacting your support centre for further assistance.

Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

richard-mcdermott New Member
New Member

Re: SMart eSolutions enabling meter assistant

I am working with two copiers; one a D95 and the other 5335. I have both of these copiers communicating with the Xerox Remote Server. The 5335 shows that both the Meter Assistant and Supply Assistant are enabled, however, the D95 shows that the meter assistant is disabled and the Supply assistant is enabled. My question is, do both the assistants get enabled when they first registar with Xerox? If it depends on the account, is there a way to enable them from Xerox? I do have other 5335 copiers that has the Supply Assistant enabled, but not the Meter assistant. I am really curious as to why the one 5335 have both of these assistants enabled. All of the copiers have their software up to date. I discovered this when some would not even communicate with the Xerox server because the SHA-1 certificate was expired. Updating the software corrected this to a SHA-2 certificate. Thank You for your reply.

0 Kudos
Analyst Nation Moderator Joe053204-hcl
Analyst Nation Moderator

Re: SMart eSolutions enabling meter assistant

It has to do with the lease/contract, not the settings.

Typically meter reads automagically work when you get the printer connected to the edge server

Supplies never do (Xerox would be in trouble if they started sending supplies to people all willy nilly ;-)

So you get it set up and communicating, then call Xerox and tell them (Supplies line) that you want to setup ASM or Auto Replenish. They will get your billing info, ask for an inventory of what you currently have on hand and then after about 48 hours, the printer should show it as enabled.

Only older devices made by FujiXerox even show the Meters vs supplies thing, new devices just show whether or not they can reach the edge server.


Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!