@ITMAN1223 wrote:
Hello,
I would like to only see the main firmware version of all my xerox printers when Lansweeper pulls in all the SNMP data. I understand I can see all firmware and software versions using the HrDesc but not what I am looking for. I really dont need to see all of them. Is their an OID/MIB that will only output the main firmware version of the printer/copier?
I have been googling and trying different things and getting nowhere with this. if I have to deal with seeing every single firmware/software versions of the printer I understand.
Example of what LS is pulling in:
Description: Xerox WorkCentre 3345; SS 60.006.14.000, NC 4.00.50.82, UI V5.51.00.59.00_20112310, ME V0.00.39, CCOS 6.9.P
I only want to see:
SS 60.006.14.000
So what I am asking is their an OID/MIB that will only show me what I would like to see?
Any help would be apprecaited.
Hello,
I give you some info please see below and folow step by step.
Query the "sysDescr" OID:
The "sysDescr" OID (1.3.6.1.2.1.1.1) provides a textual description of the system, including firmware version information. It might include all the details you mentioned earlier, but you can extract the main firmware version from the output.
You can use a tool like SNMPWalk to query the "sysDescr" OID for your Xerox printer. The output will contain information about the printer, including the main firmware version.
Query specific Xerox-specific OIDs:
Xerox often provides specific OIDs for extracting firmware information. The exact OIDs might vary depending on the printer model and the firmware version.
You can try querying the following OIDs to
see if any of them provide the main firmware version:
1.3.6.1.4.1.253.8.53.13.2.1.10 (FirmwareVersion): This OID is commonly used for Xerox printers to obtain the firmware version.
1.3.6.1.2.1.43.5.1.1.17 (prtGeneralFirmwareRev): This OID is defined in the Printer MIB and might provide the main firmware version.
I hope my suggestion is work for you.
