XSA + MAC OS 10.9.4 + printing > Wrong accounting codes

[john-doerty]

Tested also for a Xerox Workcentre 7855 and MAC OS 10.9.4! It works too!

Warning : The 78xx doesn't exist in this driver, so use the 75xx, it's almost the same MFP! :)

[john-doerty · Accepted solution]

Hi everybody,

I finally contacted Xerox assistance level 2. They told me the last drivers downloadable on the Xerox website are not compatible with XSA (because of the PPD). So they made me download and install the driver 2.79 :

http://www.support.xerox.com/support/workcentre-4250/file-download/enus.html?operatingSystem=macosx1...

And problem solved!!!

I remind you I did it for a WC 7530 + MAC OS 10.9.4, I don't know if this solution is compatible with other MAC OS or/and MFP.

Hope it might help you! ;)

[Mitchell889923-xrx]

Hi John-doerty

You may also consider reviewing the Adimnistrator guide which has some good information related to network accounts and XSA with Mac and Windows.

If that does not resolve your issue you may consider contacting our specific product support experts :
In the US Fast Track to the Expert
If you are outside the USA you should contact the local support center in your area which you can find here:
http://www.xerox.com/about-xerox/contact-us/enus.html

[john-doerty]

Thanks Kimzi, I'll try that and keep you in touch!

But I still don't understand why it doesn't work through the set up of the driver itself though...

[Kimzi]

Hi again, John!

I do not have the exact PPD so I cannot give you a 100% accurate answer, but I suggest you have a look at THIS thread.

It's similar.

Best Regards

Kimzi

--------------------------------------------
Please remember to select "Accept as Solution" for posts that helped you solve the issue.

[john-doerty]

Hi Kimzi,

Yes I installed the latest version of the driver.

I didn't set up the PPD of the MFP... where are the lines concerning the accounting?

Best regards,

John

[Kimzi]

Hi, John!

What about setting it up in the ppd being used on the MAC, does that work?

Have you tried the latest driver?

Best Regards

Kimzi

--------------------------------------------
Please remember to select "Accept as Solution" for posts that helped you solve the issue.

[john-doerty]

Hi everybody,

MFP : Xerox WC 7530

OS : MAC OS 10.9.4

I have set several XSA accounts on a WC 7530. With windows drivers no worries... but we also have a MAC on OS 10.9.4.

Without XSA the printing is totally fine on this MAC, but with XSA enabled (for printing), when a job is sent, the MFP only print a sheet with a message "wrong accounting codes" or something like that.

Of course I have set the Xerox Standard Accounting correctly in the Driver \ Xerox features \ Advanced \ Accounting.

Please help me I can't find a solution! :(

Thank you in advance,

John