Re: XSA Print Driver on Print Server Failing

RuiC-Xerox · ‎01-15-2014

Tstram,
Initialy I would say no. But I have seen different firmware versions on the same printer model, having both behaviours.

If you are concerned with TCP/IP, than print a configuration report before the reset. This will provide the information you require to reconfigure.

Please select Accept as Solution if you feel this post has helped you.

tstram · ‎01-15-2014

If I perform a software reset will it wipe all the network configuration settings?

CherylO-Xerox · ‎01-13-2014

Hi tstram,

Thank you for using the Support Forum. Please take a look at the solutions for Print jobs deleted. Double check the settings are set correctly but I think you may need to do a software reset. If this does not help please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

tstram · ‎01-09-2014

I have the XSA Accounting enabled within the printer driver on a print server. When printing the job, a user ID is accepted and the job is sent to the printer and prints successfully. About 60 seconds after the job prints a Xerox Job Tracker notification pops up stating the print failed, even though it actually printed. After successfully printing multiple pages, and still receiving the failure notification, I generated an accounting report that showed no jobs had been printed. What am I missing?

Printer Model: Xerox WorkCentre 5740 v1 Multifunction System