cancel
Showing results for 
Search instead for 
Did you mean: 
abc New Member
New Member

errors in calling xrxScanInitiateScan

Product Name: Xerox AltaLink C8030 / C8035 / C8045 / C8055 / C8070 Color Multifunction Printer
Operating System: Not Applicable

We have connectkey application . 

It call the  function named xrxScanInitiateScan in XRXScan.js. it worked well in all other types of MFPs except AltaLink ( we tested on C8045)

But when this was call we got error, the  response is as below

 Capture.PNG

 

Please suggest. It was working fine before.

0 Kudos
6 Replies
Analyst Nation Moderator Joe053204-xrx
Analyst Nation Moderator

Re: errors in calling xrxScanInitiateScan

My guess is that you need to enable Remote Start on the AltaLink, it is off by default on Connectkey and AltaLink, but possibly yours was enabled before-hand.

 

1.JPG

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
0 Kudos
abc New Member
New Member

Re: errors in calling xrxScanInitiateScan

Thanks for your response.

We checked this setting on Altalink .

This is already enabled but still same issue.

0 Kudos
Analyst Nation Moderator Joe053204-xrx
Analyst Nation Moderator

Re: errors in calling xrxScanInitiateScan

Then you best call Xerox and go through to 2nd level support, because the issue will need to be escalated up to Engineering for a response, which can't be done on the forum.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
0 Kudos
abc New Member
New Member

Re: errors in calling xrxScanInitiateScan

Could you please suggest the best way to reach 2nd level support.

 

0 Kudos
abc New Member
New Member

Re: errors in calling xrxScanInitiateScan

Could you please help us reach out to next level support

0 Kudos
Highlighted
Analyst Nation Moderator Joe053204-xrx
Analyst Nation Moderator

Re: errors in calling xrxScanInitiateScan

Call Xerox support, use the Serial number of the AltaLink you are testing on.

They will escalate the call to 2nd level, 2nd level support will need a scan of the Configuration report from the printer, and the EIP app in question if it isn't already in the App Studio or App Gallery.

It would be helpful to have the Config sheet of the Connectkey device that does work for comparison and replication.

If you are in the USA, the support line is 1-800-821-2797

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
0 Kudos