cancel
Showing results for 
Search instead for 
Did you mean: 
Jake Y New Member
New Member

Unable to Add VersaLink C405 device to App Gallery

 

When trying to add a VersaLink C405 to App Gallery it just spins this forever.  I was able to add an AltaLink C8035 just fine.   C405 is using firmware version 68.31.81

 

Capture.JPG

0 Kudos
8 Replies
Moderator XAG Admin
Moderator

Re: Unable to Add VersaLink C405 device to App Gallery

Hello, Jake. 

Thank you for the message. 

Can you verify that the Host Name (ksophe04-4b559.dhcp.sprint) matches the actual host name for the device, please? 

This can be done by following these steps: 

Open an web browser. 

Enter the IP address for device. 

Log in using the device admin credentials. 

Select the Connectivity option that displays along the left edge of the page. 

Select the Ethernet tab that displays along the top of the screen. 

On the next screen, check the Host Name that displays at the top and to the right side of of the screen.  

If the host names do not match, try adding the device using the Host Name that displays on the browser screen. 

There is one other option.  You could use the device IP address to add the device to App Gallery. 

Please let me know if neither of these options allow the device to be added and I will investigate further. 

Thank you, 

XAS Moderator

 

 

0 Kudos
Jake Y New Member
New Member

Re: Unable to Add VersaLink C405 device to App Gallery

Confirmed Hostname also tried IP address. Just spins, never adds the device.
0 Kudos
Moderator XAG Admin
Moderator

Re: Unable to Add VersaLink C405 device to App Gallery

Hi, Jake. 

It looks like DNS can't resolve that Host Name for some reason. 

Would you be able to share the device IP address and config report with me, please?    You can send the information privately to our email:  xerox.app.gallery.feedback@xerox.com.

One other thing to try: go to the device, launch the App Gallery app and log in at the device. 

If the device settings and network are configured correctly, the device should be added to your account. When you go back to the App Gallery Web Portal and log in, the device should display on your Devices tab.  If the device is not added as described here, please let me know.  We may need to set up a WebEx session so that I can look at the device remotely.

Thank you, 

XAS Moderator

 

Deb

 

 

0 Kudos
Jake Y New Member
New Member

Re: Unable to Add VersaLink C405 device to App Gallery

configuration report has been sent to xerox.app.gallery.feedback@xerox.com

Note when i try to use the Xero App Gallery on the device's control panel itself it just spins as well, it never makes it to any option to enter account information.

0 Kudos
Analyst Nation Moderator Joe053204-hcl
Analyst Nation Moderator

Re: Unable to Add VersaLink C405 device to App Gallery

1. I'm pretty sure you need to update the firmware, maybe not for App Gallery itself, but it will need to be done for Dropbox later anyway. So grab it and do that.

2. Make sure it has access to the outside world, because Time/date/DNS/Proxy settings aren't used for print. So go to EWS > System > Remote Services Upload and give that a go

1.JPG

Well, would you look at that, mine fails too ;-)

2.JPG

My printer had the time off by an hour (Didn't change with DST) as well, the incorrect DNS was set (Test lab, probably done for a reason by someone, then forgot to fix when test complete, common issue in our test labs sadly)

Anyway, works now.

3.JPG

 

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe
0 Kudos
Moderator XAG Admin
Moderator

Re: Unable to Add VersaLink C405 device to App Gallery

Hi, Jake. 

Thank you for the additional information.  I have your report and am investigating.  I will reply when I have more information to share. 

Thanks again!

XAS Moderator

0 Kudos
Highlighted
Jake Y New Member
New Member

Re: Unable to Add VersaLink C405 device to App Gallery

verified DNS and time is correct, RSU was successful but still can't add deviceCapture.JPG

0 Kudos
Moderator XAG Admin
Moderator

Re: Unable to Add VersaLink C405 device to App Gallery

Hi, Jake. 

I have sent you an email. Please let me know if you'd like to go forward with the request in the email. 

Thank you, 

XAS Moderator

0 Kudos