Search the Community
Customer Support Forum
- Community Information
- Support Forums
- FreeFlow Production Workflow Forum
- Community Suggestions
- Ask the Expert
It is impossible to set custom page dimensions in driver with Windows 7 x64 - page dimension controls are inactive (are greyed).
In Windows XP SP3 - all custom page dimensions settings works properly.
I've try install Global Printing Driver but it fails to print at all.
Any suggestion to fix custom page dimensions?
The solution was found with the tech support service: 1. Run DOS prompt as administrator. 2. In D...
The solution was found with the tech support service:
1. Run DOS prompt as administrator.
2. In Dos window open printer driver: printui.exe /p /n "Your Printer Name In the System"
All page dimensions controls are editable.
I hope that someone may be able to help me out here. We recently purchased a Xerox WorkCentre 3220. We had no issues setting this printer up as a network printer, and everything seems to be working fine. However, I am unable to connect to the printer via a web browser. I can ping the IP address, so I don't understand why I am getting "Internet Explorer cannot display the webpage"
when I put the same IP address in the web browser.
Am I missing something? Is there a http setting on the printer someplace that I don't know about on?
Thanks in advance for any responses.
We have a Phaser 8550 DP-2 printer with fewer than 30,000 prints. The prints look as if some of the dots have been shifted down. It affects all colors. It almost looks blurry but you can see the individual dots that are shifted down and they appear sharp. About every 8 pages I will get a clean print. This happens with: Xerox paper, clean power, after cleaning plastic blades, and running through print quality troubleshooting solutions from printer.
Hello MarkGHC, Thank you for participating in the Xerox Customer Support Community. ...
Thank you for participating in the Xerox Customer Support Community. We're glad to hear that the issue with your printer has been resolved with the help of another community member! To help others who may have the same or similar issue that you were experiencing, could you please click on the "Accept as Solution" button in the bottom right corner of the post? That will make this thread visible to everyone in the community who is looking for a solution to a problem just like the one that you had. Thank you very much, MarkGHC and please keep visiting the Xerox Customer Support Community!
When I'm using "Scan To Mail" service, 200ppp is the default resolution.
I can change it to 300ppp but not 400ppp or 600ppp (the button is grey).
Where can I change the max resolution availability without change the defaut resolution ?
Thanks for your attention.
I have a Phaser 8560 connected via ethernet (cable) to a Billion wireless modem router connected by my PC running Windows 7 (64 bit). After a Windows automatic update the printer stopped working. It is possible to access the Phaser via the IP address using IE8. It is also possible to print adobe doc viewed on the internet. However, it is not possible to access the Phaser from Windows 7. Did a system restore but that didn't help either.
Had the Xerox tech out and he checked the drivers and network settings - all OK and up to date. He said that it was a Windows issue (maybe due to having a 64 bit PC) and he couldn't help. Have contacted Windows but no answers at the moment. Any suggestions??
Problem fixed......Xerox technician used remote access to delete problem files that didn't appear t...
Problem fixed......Xerox technician used remote access to delete problem files that didn't appear to be deleted during reinstallation of driver. After doing a completely clean reinstall printer is now working. Thanks Xerox
I am trying to print to a Xerox WorkCentre 7655. I have been using this printer for years, but recently it stopped working. It's been a couple weeks now, at least, since the problem developed, and I can't recall what might have changed on my system, other than maybe an OS update from Apple.
I am printing from Mac OS X 10.6.8. I can print to another Xerox 260 printer on the network. But when I try to print to the 7655, I consistently get this error:
OFFENDING COMMAND: X_isTransparency
This happens regardless of what application I print from (Adobe InDesign, MS Excel, a simple word processor called Bean).
Today I tried installing a new v2.32.0 driver from Xerox. At the end of the installation, it automatically printed a test page, which printed correctly. But I still get the same error when printing from any application.
It looks like you have also already ruled out bad files. It's hard to ignore the timing with the O...
It looks like you have also already ruled out bad files.
It's hard to ignore the timing with the OS update though.
Just curious, have you tried completely blowing away the printer and creating a new one after doing the supplemental update?
Unable to login 7346 remotely. When I attempt the change a setting, this login window comes up (with the printer's IP address):
The server x.x.x.x at CentreWare Internet Services requires a username and password.
Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection).
I enter the same default user name and password, I use to login via the front panel. After 3 attempts, I get a "Login failed" page (with a back button). I then restart the printer, but still can't login. I checked the printer's configuration against several other 7346s we have and don't find any differences.
Is there a different login/password default for the 7346 web interface?
Can anybody think of a setting that might be causing this?
I buy a Xerox Phaser 4510.
What kind of transparency paper I must use with this printer?
I think the temperature of the Xerox laser printers is higher than other laser printer.
I must to use "Xerox" transparency laser paper?
What is the best transparency paper for my printer?
This morning we are downloading a veriable data job and the images seem tyo be taking longer. Prior to the issue we where recieving the images from prepress and then releasing the image for print. To increase productivity we have asked the prepress department to step the job four up. This has created a larger file. Is this common for the image to now download so slowly?
Let us say we have a 10x12 4C TIF at 300 dpi, that will be about 42 MB. The RIP has to process the ...
Let us say we have a 10x12 4C TIF at 300 dpi, that will be about 42 MB. The RIP has to process the 42 MB for every page in the PDF.
Now let's size that TIF down so that we are placing it at 100%, it is now about 2 MB.
That extra 40 MB we aren't RIPping now is going to speed up everything.
The N-1 & 1-N setting is in the Output tab/ Finishing section under Output Order.
"To take advantage of concurrent RIP and job printing, VI jobs
should be printed using 1-N. Printing N-1 will cause the entire
job to RIP before printing starts. For natural reading order,
select face down when printing 1-N. However, N-1 may be
necessary to accommodate some finishing selections."
Will the hard disk for the 8560MFP work with the 8560 DN?
Will the hard disk for the 8550 work with the 8560DN?