Search

Hi all,

Is there a way to select all UNUSED Impose presets at once to delete them, or even add a prefix to their names?

I have been trying to sort some of the presets and workflows that have been created adhoc. As they were created as and when needed they abide by inconsistant naming conventions and I would like to tidy the ones I wish to keep and delete the one where their respective workflows have been deemed surplus to requirements.

It would be handy if we could select all unsued presets from any of the component options in this way.

Many thanks

Hello

I want to set a hot folder for Max Input on an network share? The documenttion seems to indicate this is possible:

Input Hot Folder Name defines the name for the hot folder configuration.

The Hot Folder Location is a location that will be monitored for job files. The following Universal Resource Identifier (URI) formats are supported:

Folder (Sandbox Location)

<drive letter>:\folder\

 
\\server\share\folder\

but when editing my Hot Folder set up it wants to look for the one stored in the the default location :

C:\Xerox\FreeFlow\Core\00000000-0000-0000-0000-000000000000\Data\Hot Folders\.....

I must be doing something in the wrong order? Bear in mind I am editing an existing one.

Thanks

Simon

Hi,

I attempted to load 3 pdf files yesterday via the Digital Publisher Ordering Tool, but none of the files ever reached their destination. Shoirtly after uploading, each job appeared with a "Job submitted successfully" check mark in the Status column of the Job Status window. In the Active Jobs tab of Freeflow Core, however, they seem to be stuck: Status in Workflow has been reading as "Pending" for well over a day now (see attached screengrab). Any ideas as to what might prevent these files from completing their upload? Thanks.

Is there a setting somewhere that will instruct Freeflow Core to delete jobs from the completed jobs queue after a set amount of time? I thought that jobs were deleting after 24 hours automatically but it appears that this wasn't the case or it stopped happening sometime last week. It may have happened after the last update. Now I have to go in and manually delete jobs so that I do not have space issues.

Hello all.

We recently added a Phaser 5550 to our operation, it is intended to replace our Phaser 4510.

The problem I am having is that no job I submit to it with more than 10 records will print that quantity. the same job would print with no issues on our 4510.

The First two lines of the error read:

ERROR: undefined (COMMAND TYPE: nametype)

OFFENDING COMMAND: selected pages: 1 10 "Selected pages: 1 10"

Windows 8 PC, printing from FreeFlow VI Design Pro 12.0 SP1.

Any help is appreciated, thanks.

Hi there,

Can somebody tell me what the follwing message means, or is referring to please? Please see screenshot attached to see where it occurs.

'Warning Database Critically Low - Less Than 4% Remaining'

I am trying to impose 148mm x 105mm (A6) on to a press sheet size of 450mm x 320mm (SRA3). The PDF I am trying to impose is 154mm x 111mm because it has 3mm bleed on all edges.

Is there are way to impose this 8up by only utilising 2mm bleed instead of the available 3mm and omitting the inner cropmarks?

I can do this in InDesign (see attached image) but would realy like to automate this as much as possile using FFC.

Hi all,

I am very new to FFC and I am trying to make a workflow for imposing an A4 16pp booklet onto SRA3(450mm x 320mm). I have tried what I think should do the trick and all seems fine when it saves to the Output Folder but the sheet size of the outputted PDF is 467.2mm x 304.8mm rather the the intended SRA3 450mm x 320mm.

I have atatched the 7 screen shots for inspection.

Screen shots 1 to 4, are of the tabs and options within these tabs which I have selected in my attempt to make this work.  Screen shoot 5 is the completed jobs tabs showing that the job was sucsessfull without any warnings.

Screen shots 6 and 7 are of the original PDF and outputted PDF respectively. Notice the size indicated at the bottom right of the last screen shot which was taken from Acrobat. It should be SRA3.

Thanks you all in advance for your attention...

Hey,

After upgrading to ffc 5 and moving to a new server, the old path:

\Xerox\FreeFlow\Core\Data\00000000-0000-0000-0000-000000000000\Data\Save Destination

Is no longer there. I did find the 0000 folder here: 

C:\Program Files\Xerox\FreeFlow Core\Tenants\00000000-0000-0000-0000-000000000000\

but there is no save destination folder i could find. 

Where is the new location?